Signal Transport

Products   Applications   Price Lists   Ordering/Contact   Specials   Solutions

Legacy Products

Price Lists

SMC Panel Systems

Applications & Technical Documents

SMC Panel Systems
Project Patch
Studio Kits
Synth Driver
Swing Rack

System Integration Solutions

System Integration Solutions

Solution 01 MPS-RACK1-SD: A new "Swing Down" version of our popular 19" Rack Adapter.

Solution 02 MPS-B27 & MPS-B32: New MPS Panels - MPS-B27: 4 XLR Connector on a "B" size panel. MPS-B32: 4 modular connectors (RJ11;RJ45;Fiber ST and SC) on a "B" size panel.

Solution 03 MPS-B39 & MPS-B40: New "B" size panels for those needing USB and Firewire connectivity.

Solution 04 ST-MD4, 6, or 8: New female/female Mini-Din bulkhead connectors to fit popular MPS-A9, A14, A15, A23, and A25. ST-TL-1: New female/female Toslink bulkhead connector to fit our popular XLR panels: MPS-B7, B14, B27, and C3.

Solution 05MPS-A37 & MPS-A41: New A size panels designed to accommodate Sub-Miniature D connectors, male or female 9 pin or high density 15 pin with the connector(s) mounting from the rear of the panel. MPS-B41: New B size panel with cutouts for 3 modular connectors from ATT/AVAYA. MPS-A41: New A size panel designed to accommodate a single bulkhead female to female DVI-I connector.

Solution 06In the Wall, Between the Studs, Back box without knockouts.

Solution 07MPS gang panels.

Solution 08Custom panel systems: Produce custom panels in a wide selection of materials.

Solution 09SPS 19" Rack Panels.: Fits industry standard gang outlet boxes.

Solution 10Modular & Standard Panel Systems: New MPS "B" size panels for "Keystone" connectors supplied with an adaptor collar. New 19" by 1RU panel with builtin label strip and cable tiebar.

Solution 11Modular Panel System: New FMR that allows you to 'swing down' front of flush mount ring to access rear of panels after installation.

Solution 12MPS-SMCM-8MU: New Modular Surface Mount Chase with knockouts.

Solution 13MPS-SMC-16MU-SD: New swing down version of our Surface Mount Chase.

Solution 14MPS-SB-19MU-LP: A low profile edition of our Stage Box line.

Solution 15SPS-19-_RU-FP/FFP: 19" flat and flanged SPS filler panels.

Solution 16New MPS Panels: Colored finish to our MPS panels.

Solution 17New MPS Panels: Adapter Wall Pates for Lite MPS (2RU) range of panels.

Solution 18Adapter Plate: Adapter Plate for Swing Down (SD) FMR 16MU to SMBB back box

Solution 19Label Strip Option: Label Strip Option for all 19" Rack Panels.

Solution 2019" Rack Adapter: 19" Rack Adapter for MPS Lite Modules.

Solution 21MPS Lite: New 2RU Modular Panel System

Solution 22Adapter Plates for Ganged Wall Boxes: Adapter Plates for Ganged Wall Boxes that accept MPS-Lite Modules

Solution 23C9 Camera Connector Panel: Camera Connector Panel for MPS Lite, L-MPS-C9

Solution 2419MU Tiebar: Tie-Bar for MPS Lite 19" Rack Adapter.

Solution 25FMR: Adapter Ring for 6" tall gutter boxes, raceways and screw cover wire-ways.

Solution 2612MU AV Enclosure: A 12 Module Unit In-the-wall enclosure for MPS-Lite panels.

Solution 2733MU Adapter Plate: A 33MU Adapter Plate to fit a 12" x 12" NEMA 1 enclosure and support MPS-Lite panels.

Solution 28B size panel for Keystone connectors : A series of B size panels to support Keystone style connectors.

Solution 2916MU SMC with Knockouts: Introducing a new version of our ever popular Surface Mount Chase with Knockouts in the back and bottom for cable access.

Solution 30New SMBB Enclosure: In the Wall, Between the Studs, Back box with KO's, Adapter Plate and low profile Flush Mount Ring

Solution 31New A size panels for Keystone and Fiber: A75 supports up to 4 Keystone connectors and panels A71~A74 to support Low Profile Snap-In Fiber Adapters.

Solution 34New B size panel for Opticalcon Camera connectors and Pass-Through panel for cables.: Angled B9-N02 supports a single N02-4 connector and panels B28 allows cables to pass-through the pane via the Brush Insert.

Solution 35New Adapter Plates, Surface AV14 and Flush AV14-F, for MPS-Lite panels installed to a 8" x 8" NEMA Screw Cover Junction Box: Supports all MPS-Lite panels, 2 rows of 7MU for a total of 14MU for the connector interface.

Back to main